Κατεβάζεις από τα plugin το weathermsn και βάζεις το μέρος που σε ενδιαφέρει.-
Μετά πας menu/panel+/system panel/διαμόρφωση TranspBA Skin/weather on infobar.-
Κατεβάζεις από τα plugin το weathermsn και βάζεις το μέρος που σε ενδιαφέρει.-
Μετά πας menu/panel+/system panel/διαμόρφωση TranspBA Skin/weather on infobar.-
menu/panel+/system panel/διαμορφωση transBA skin/weather ON in infobar και απο τα προσθετα εγκαθiστας το weather msn
Το New SatDreamGr Images 6 μπορεί να μπει σε Zgemma H9S 4K και πως?
δεν υπάρχει υποστηρίξει από το satdreamgr αυτού του δεκτη... δοκιμασε με openpli
Member SatDreamGr Projects
Καλημέρα και καλο μηνα
εχω ένα VU+ zero 4k και εχω εγκαταστησει το satdreamgr 6
Όταν ανοιγω καναλια 4κ που είναι ελευθερα στον hot birdη τον Αστρα ο δεκτης κρασσαρει
πρεπει να κανω καποια ρυθμιση επιπλέον ?
ενα crashlog ισως να δειξει κατι...
ολα ειναι FLU
Member SatDreamGr Projects
και που μπορω να βρω το crashlog ?
Μόλις κάνει επανεκκίνηση μετά το crash, θα μπεις με ftp στο /tmp και θα βρεις το enigma2crash.log (κάπως έτσι είναι το όνομα, δε θυμάμαι ακριβώς).
Member SatDreamGr Projects
Edision os mio4k, Edision os nino | Gibertini OP100L 22W - 75E | Inverto Black Ultra
οκ θα το ψαξω και θα το ανεβασω αν μπορω εδώ
και παλι ευχαριστω για την βοηθεια
το enigma2crash
OpenPLi Enigma2 crash log
crashdate=Fri Feb 1 20:21:25 2019
compiledate=Jan 31 2019
skin=Satdreamgr-HD-TranspBAOLD/skin.xml
sourcedate=2019-01-30
branch=develop
rev=57b497e
component=Enigma2
stbmodel=zero4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p7 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
nimsockets=NIM Socket 0:
imageissue=satdreamgr 6 %h
ADD Peer vuzero=vuzero.local:8001
ADD Peer vusolo2=vusolo2.local:8001
ADD Peer vuzero=vuzero.local:8001
ADD Peer vusolo2=vusolo2.local:8001
REMOVE Peer vuzero
REMOVE Peer vusolo2
REMOVE Peer vuzero4k
REMOVE Peer vuzero
REMOVE Peer vusolo2
REMOVE Peer vuzero4k
ADD Peer vuzero=vuzero.local:8001
ADD Peer vusolo2=vusolo2.local:8001
ADD Peer vuzero=vuzero.local:8001
ADD Peer vusolo2=vusolo2.local:8001
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 69, in dispatchEvent
File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 27, in serviceEvent
File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/usr/lib/enigma2/python/Components/Converter/TranspBAOLDExtraInfo.py", line 822, in changed
Converter.changed(self, what)
File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 24, in changed
File "/usr/lib/enigma2/python/Components/Element.py", line 15, in wrapper
File "/usr/lib/enigma2/python/Components/Converter/TranspBAOLDExtraInfo.py", line 695, in getText
return self.createVideoCodec(info)
File "/usr/lib/enigma2/python/Components/Converter/TranspBAOLDExtraInfo.py", line 303, in createVideoCodec
return ("MPEG2", "MPEG4", "MPEG1", "MPEG4-II", "VC1", "VC1-SM", "")[info.getInfo(iServiceInformation.sVideoType)]
IndexError: tuple index out of range
dmesg
<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.1.20-1.9 ([email protected]) (gcc version 6.2.0 (GCC) ) #1 SMP Thu Sep 13 19:39:34 EEST 2018
<6>[ 0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[ 0.000000] Machine model: BCM972604USFF
<6>[ 0.000000] moving dtb from 0x0000000007618000 to 0x00000000008cb5d0
<6>[ 0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
<6>[ 0.000000] cma: Reserved 16 MiB at 0x0000000051400000
<4>[ 0.000000] Forcing write-allocate cache policy for SMP
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 516096
<7>[ 0.000000] DMA zone: 512 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 450560 pages, LIFO batch:31
<6>[ 0.000000] psci: probing for conduit method from DT.
<6>[ 0.000000] psci: PSCIv0.2 detected in firmware.
<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[ 0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r8192 d24116 u49152
<7>[ 0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515584
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 1306516K/2064384K available (6111K kernel code, 310K rwdata, 2036K rodata, 304K init, 197K bss, 741484K reserved, 16384K cma-reserved, 1070076K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc07fd278 (8149 kB)
<5>[ 0.000000] .init : 0xc07fe000 - 0xc084a000 ( 304 kB)
<5>[ 0.000000] .data : 0xc084a000 - 0xc0897bb0 ( 311 kB)
<5>[ 0.000000] .bss : 0xc089a000 - 0xc08cb5d0 ( 198 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq: 89)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq: 61)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq: 62)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq: 91)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq: 57)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500, parent irq: 95)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400, parent irq: 96)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540, parent irq: 93)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440, parent irq: 94)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480, parent irq: 98)
<6>[ 0.000000] MCP: Enabling write pairing
<6>[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
<6>[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000371] Console: colour dummy device 80x30
<6>[ 0.000389] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000397] pid_max: default: 32768 minimum: 301
<6>[ 0.000488] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000840] CPU: Testing write buffer coherency: ok
<6>[ 0.001042] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001077] Setting up static identity map for 0x8480 - 0x84d8
<6>[ 0.014802] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.014848] Brought up 2 CPUs
<6>[ 0.014855] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.014859] CPU: All CPU(s) started in HYP mode.
<6>[ 0.014862] CPU: Virtualization extensions available.
<6>[ 0.015136] devtmpfs: initialized
<6>[ 0.022749] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0 rev 0
<6>[ 0.022943] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.023970] NET: Registered protocol family 16
<6>[ 0.025108] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[ 0.029908] cpuidle: using governor ladder
<6>[ 0.035917] cpuidle: using governor menu
<6>[ 0.041209] No ATAGs?
<6>[ 0.041243] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.041250] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ 0.041524] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
<6>[ 0.052042] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
<6>[ 0.052216] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
<5>[ 0.052534] SCSI subsystem initialized
<7>[ 0.053173] libata version 3.00 loaded.
<6>[ 0.053337] usbcore: registered new interface driver usbfs
<6>[ 0.053374] usbcore: registered new interface driver hub
<6>[ 0.053401] usbcore: registered new device driver usb
<6>[ 0.053453] Linux video capture interface: v2.00
<6>[ 0.053509] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.053512] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
<6>[ 0.053528] PTP clock support registered
<6>[ 0.053881] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.054716] Switched to clocksource arch_sys_counter
<5>[ 0.054874] FS-Cache: Loaded
<4>[ 0.060521] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[ 0.060626] NET: Registered protocol family 2
<6>[ 0.061033] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.061049] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[ 0.061072] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.061109] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.061121] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.061202] NET: Registered protocol family 1
<6>[ 0.061409] RPC: Registered named UNIX socket transport module.
<6>[ 0.061412] RPC: Registered udp transport module.
<6>[ 0.061415] RPC: Registered tcp transport module.
<6>[ 0.061418] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.061431] PCI: CLS 0 bytes, default 64
<4>[ 0.061810] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[ 0.061833] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.062587] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[ 0.063476] NFS: Registering the id_resolver key type
<5>[ 0.063508] Key type id_resolver registered
<5>[ 0.063512] Key type id_legacy registered
<6>[ 0.063523] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.063528] Installing knfsd (copyright (C) 1996 [email protected]).
<6>[ 0.063776] fuse init (API version 7.23)
<6>[ 0.064369] bounce: pool size: 64 pages
<6>[ 0.064399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 0.064407] io scheduler noop registered
<6>[ 0.064413] io scheduler deadline registered
<6>[ 0.064428] io scheduler cfq registered (default)
<6>[ 0.064675] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0aca000, irqs: 261, 262
<6>[ 0.065322] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
<6>[ 0.065661] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>[ 0.065792] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
<6>[ 0.165924] brcm-pci f0460000.pcie: link down
<6>[ 0.167239] brcmstb_memc f1102000.memc-ddr: registered
<6>[ 0.167421] brcm-waketimer f0417680.waketimer: registered, with irq 264
<6>[ 0.167591] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.168508] console [ttyS0] disabled
<6>[ 0.168533] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud = 5062500) is a 16550A
<6>[ 0.911994] console [ttyS0] enabled
<6>[ 0.915840] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud = 5062500) is a 16550A
<6>[ 0.925052] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud = 5062500) is a 16550A
<6>[ 0.937022] loop: module loaded
<6>[ 0.940877] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[ 0.948295] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
<6>[ 0.954327] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
<6>[ 0.971732] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
<6>[ 0.980709] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 0.989224] scsi host0: brcm-ahci
<6>[ 0.992685] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x100 irq 87
<6>[ 1.000619] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
<6>[ 1.008019] libphy: Fixed MDIO Bus: probed
<6>[ 1.012570] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
<4>[ 1.018453] bcmgenet f0480000.ethernet: failed to get enet-mux clock
<6>[ 1.037716] libphy: bcmgenet MII bus: probed
<3>[ 1.061863] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY clock
<6>[ 1.069699] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[ 1.075543] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[ 1.081640] xhci-brcm: xHCI BRCM driver
<6>[ 1.085636] ehci-brcm: EHCI BRCM driver
<6>[ 1.103840] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
<6>[ 1.105732] ata1: SATA link down (SStatus 0 SControl 300)
<6>[ 1.115021] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 1
<6>[ 1.133004] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
<6>[ 1.144724] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.151288] hub 1-0:1.0: USB hub found
<6>[ 1.155060] hub 1-0:1.0: 1 port detected
<6>[ 1.159246] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
<6>[ 1.164998] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 2
<6>[ 1.182949] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
<6>[ 1.194723] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.201259] hub 2-0:1.0: USB hub found
<6>[ 1.205028] hub 2-0:1.0: 1 port detected
<6>[ 1.209258] ohci-brcm: OHCI BRCM driver
<6>[ 1.213218] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
<6>[ 1.218972] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus number 3
<6>[ 1.226886] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
<6>[ 1.288072] hub 3-0:1.0: USB hub found
<6>[ 1.291845] hub 3-0:1.0: 1 port detected
<6>[ 1.295998] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
<6>[ 1.301771] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus number 4
<6>[ 1.310202] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
<6>[ 1.371069] hub 4-0:1.0: USB hub found
<6>[ 1.374842] hub 4-0:1.0: 1 port detected
<6>[ 1.379053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.385602] ehci-pci: EHCI PCI platform driver
<6>[ 1.390111] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.396311] ohci-pci: OHCI PCI platform driver
<6>[ 1.400888] usbcore: registered new interface driver usb-storage
<6>[ 1.407032] mousedev: PS/2 mouse device common for all mice
<6>[ 1.412842] i2c /dev entries driver
<6>[ 1.417011] IR NEC protocol handler initialized
<6>[ 1.421555] IR RC5(x/sz) protocol handler initialized
<6>[ 1.426620] IR RC6 protocol handler initialized
<6>[ 1.431164] IR JVC protocol handler initialized
<6>[ 1.435707] IR Sony protocol handler initialized
<6>[ 1.440339] IR SANYO protocol handler initialized
<6>[ 1.445055] IR Sharp protocol handler initialized
<6>[ 1.449772] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.455618] IR XMP protocol handler initialized
<6>[ 1.460468] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[ 1.505325] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
<6>[ 1.512007] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.518200] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.522569] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.529508] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
<6>[ 1.535615] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
<6>[ 1.571725] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using ADMA
<6>[ 1.579331] usbcore: registered new interface driver usbhid
<6>[ 1.584916] usbhid: USB HID core driver
<6>[ 1.591252] NET: Registered protocol family 17
<5>[ 1.595813] Key type dns_resolver registered
<5>[ 1.600222] Registering SWP/SWPB emulation handler
<6>[ 1.610287] ALSA device list:
<6>[ 1.613273] No soundcards found.
<6>[ 1.616957] Waiting for root device /dev/mmcblk0p7...
<6>[ 1.682396] mmc0: MAN_BKOPS_EN bit is not set
<6>[ 1.692948] mmc0: new high speed MMC card at address 0001
<6>[ 1.698584] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[ 1.703175] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[ 1.709199] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[ 1.715169] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<6>[ 1.724442] mmcblk0: p1 p2 p3 p4 p5 p6 p7
<4>[ 1.824684] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<6>[ 1.839692] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
<6>[ 1.848601] VFS: Mounted root (ext4 filesystem) on device 179:7.
<6>[ 1.855878] devtmpfs: mounted
<6>[ 1.859052] Freeing unused kernel memory: 304K (c07fe000 - c084a000)
<6>[ 2.189366] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
<5>[ 2.467523] random: dd urandom read with 7 bits of entropy available
<4>[ 2.521514] procmk_init
<4>[ 2.529037] bcm_event: module license 'Proprietary' taints kernel.
<4>[ 2.535240] Disabling lock debugging due to kernel taint
<6>[ 2.743086] nexus.ko: virtual irq: enabled (267)
<6>[ 2.747814] nexus.ko: shared gpio banks: enabled
<6>[ 5.806956] DVB: registering new adapter (_vuplus_zero4k_)
<4>[ 6.272871] bcm7252s: hotplug_callback():
<4>[ 6.272871] Hotplug - status.connected 1:0:1
<4>[ 6.279981] bcm7252s: hotplug_callback():
<4>[ 6.279981] Hotplug - connecting HDMI to display 0xe
<6>[ 6.503721] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[ 6.533123] [MPVR]: >> misc_pvr_init
<4>[ 6.539439] [VID]: 6bcm7335_video_init
<4>[ 6.545077] [AUD]: 6bcm7335_audio_init
<4>[ 6.549833] [AUD]: >> bcm_audio_capture_init
<4>[ 6.564933] qam=0, ofdm=0, satellite=1
<6>[ 6.583777] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<6>[ 6.631023] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[ 6.643146] [LCD]: registered
<6>[ 6.752851] [CI]: registered ci0
<6>[ 7.900992] [CI]: CI interface initialised
<6>[ 7.900992]
<6>[ 7.912782] [DFP]: registered dbox fp
<6>[ 7.920162] [SC]: registered sci0
<4>[ 8.056723] system_time_set wakeup mode get
<4>[ 8.120720] system_time_set wakeup mode get 0xc4
<6>[ 8.368728] f0480000.etherne:01: Broadcom BCM7260 PHY revision: 0x01
<6>[ 8.376023] bcmgenet f0480000.ethernet: configuring instance for internal PHY
<6>[ 8.475385] NET: Registered protocol family 10
<6>[ 8.480418] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 8.621926] Bluetooth: Core ver 2.20
<6>[ 8.625616] NET: Registered protocol family 31
<6>[ 8.630107] Bluetooth: HCI device and connection manager initialized
<6>[ 8.636499] Bluetooth: HCI socket layer initialized
<6>[ 8.641406] Bluetooth: L2CAP socket layer initialized
<6>[ 8.646489] Bluetooth: SCO socket layer initialized
<4>[ 9.800266] [VID]: VIDEO_SET_STREAMTYPE 0
<4>[ 9.804737] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 9.808983] [VID]: VIDEO_PLAY 1 2 0
<4>[ 9.818040] [VID]: VIDEO_CONTINUE 1 1
<4>[ 9.821922] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<4>[ 9.984276] [VID]: VIDEO_STOP 0 1
<4>[ 9.988606] [VID]: VIDEO_SELECT_SOURCE 0 0
<6>[ 10.379829] bcmgenet f0480000.ethernet eth0: Link is Down
<5>[ 11.510597] random: nonblocking pool is initialized
<6>[ 11.580705] bcmgenet f0480000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
<6>[ 11.589159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[ 12.824417] [AUD]: AUDIO_SET_MUTE 0
<4>[ 12.828375] [AUD]: AUDIO_SET_MIXER -849494384
<4>[ 12.832846] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[ 12.837919] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[ 12.844552] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 16.365533] [AUD]: AUDIO_SET_MIXER -849494384
<4>[ 16.370250] [AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
<4>[ 16.375499] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 16.382486] [AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
<4>[ 20.581251] FE tune
<4>[ 21.859880] [AUD]: AUDIO_SELECT_SOURCE 0
<4>[ 21.863949] [AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[ 21.868161] [AUD]: downmix 0 state : 0
<4>[ 21.872293] [AUD]: AUDIO_PAUSE 3
<4>[ 21.875628] [AUD]: AUDIO_PLAY 3 decoder start : 0
<4>[ 21.881798] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 21.886028] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
<4>[ 21.892927] [VID]: VIDEO_GET_SIZE aspect: 1 3
<4>[ 21.897546] [VID]: VIDEO_SET_STREAMTYPE 1
<4>[ 21.901780] [VID]: VIDEO_FREEZE 3 0
<4>[ 21.905367] [VID]: VIDEO_PLAY 3 5 2
<4>[ 21.914213] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 21.918397] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 21.922940] [VID]: VIDEO_CONTINUE 3 1
<4>[ 21.926808] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcd4fb900
<4>[ 21.931786] [AUD]: Mute : 0
<4>[ 21.934894] [AUD]: AUDIO_CHANNEL_SELECT 0
<4>[ 22.160708] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 22.164877] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 22.169545] [VID]: VIDEO_CONTINUE 3 1
<4>[ 22.173455] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcd4fb900
<4>[ 22.178436] [AUD]: Mute : 0
<4>[ 607.313314] [VID]: VIDEO_STOP 1 1
<4>[ 607.316774] [AUD]: AUDIO_STOP 0
<4>[ 607.344527] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
<4>[ 607.348903] [AUD]: AUDIO_CONTINUE aph=0 0 0
<4>[ 607.433074] FE tune
<4>[ 607.772955] [AUD]: AUDIO_SELECT_SOURCE 0
<4>[ 607.777096] [AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[ 607.781303] [AUD]: AC3 downmix 0 state : 0
<4>[ 607.785499] [AUD]: AUDIO_PAUSE 3
<4>[ 607.788840] [AUD]: AUDIO_PLAY 3 decoder start : 0
<4>[ 607.797215] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 607.801440] [VID]: VIDEO_SET_STREAMTYPE 7
<4>[ 607.805628] [VID]: VIDEO_FREEZE 3 0
<4>[ 607.809227] [VID]: VIDEO_PLAY 3 19 2
<4>[ 607.818355] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 607.822560] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 607.827092] [VID]: VIDEO_CONTINUE 3 1
<4>[ 607.830952] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcdb6f980
<4>[ 607.835928] [AUD]: Mute : 0
There are currently 1 users browsing this thread. (0 members and 1 guests)