How to upgrade the Vu+ Ultimo image via USB
How to upgrade the Vu+ Duo / Vu+ Duo LE image via USB
- Save the image on the PC (USB version)
- Unzip files
- Format USB flash drive with the file system FAT,or FAT32
- Create on the stick : Directory/vuplus/duo
- Copy to the stick the 3 files into http://images.digitalworldz.co.uk/sm...%20-%20lol.gifirectory/vuplus/duo
- Power off VU+ STB
- Remove all USB devices from the box
- Plug-in the USB Stick into Vu+ Box
- Turn on the VU+ STB
- Firmware Update will start automatically
- Wait for the VFD to display "Finished ... please reboot"
- Unplug the USB Stick from the box
- Power off the VU+ STB , and restart it again
How to upgrade the Vu+ Solo image via USB
- Save the image on the PC (USB version)
- Unzip files
- Format USB flash drive with the file system FAT,or FAT32
- Create on the stick : Directory/vuplus/duo
- Copy to the stick the 3 files into http://images.digitalworldz.co.uk/sm...%20-%20lol.gifirectory/vuplus/duo
- Power off VU+ STB
- Remove all USB devices from the box
- Plug-in the USB Stick into Vu+ Box
- Turn on the VU+ STB
- Firmware Update will start automatically
- The Standby LED will be red and if the USB stick detected ,the LEDs lights up
- If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
- Power off the VU+ STB , and restart it again
How to upgrade the Vu+ image via Serial Port
Sometimes it comes that the box only respond via serial port.Then we need the *. Nfi file and the Vu + Util.
The Vu+ Util for serial flash ,
- Image saved on the PC (nfi version)
- Unzip files
- Start Vu+ Util
http://www.digitalworldz.co.uk/attac...415224&thumb=1
http://www.digitalworldz.co.uk/attac...415224&thumb=1
- Check the DHCP if you do not have any static IP for VU+
http://www.digitalworldz.co.uk/attac...415224&thumb=1
- Then click the Connect button
http://www.digitalworldz.co.uk/attac...415224&thumb=1
- Now you should see “Serial port open success. Please turn on your box.”, then power on the VU+ and since DHCP is set, click Next button to set IP
http://www.digitalworldz.co.uk/attac...415224&thumb=1
- Now you see " IP Setup Success" in VU+ Util
http://www.digitalworldz.co.uk/attac...415218&thumb=1
- Now browse the *. nfi File menu. We recommend, of course, the VTi Image
http://www.digitalworldz.co.uk/attac...415218&thumb=1
- And then click the Flash button I VU+ Util you will see "Reading file,please wait a moment..."
http://www.digitalworldz.co.uk/attac...415218&thumb=1
- then it will appear "flashing process is completed"
http://www.digitalworldz.co.uk/attac...415218&thumb=1
- Now the update is finished. You can click "disconnect" to disconnect and then exit at Exit button, in the VU + Util.Power off the VU+ and then restart the box
